Ask a Question

Solution ID : SO14829

Last Modified : 06/04/2018

Install SSL Web Server Certificate in Microsoft IIS 5.0

Problem

Install certificate
Install SSL Web Server
Install SSL Web Server Certificate in Microsoft IIS 5.0

Solution

To install an SSL Web Server Certificate in Microsoft IIS 5.0 follow the steps below:

Thawte Reseller customers
Download your certificate in PKCS#7 format, refer to solution SO17717


Installing an SSL Web Server Certificate

The certificate must be downloaded in PKCS#7 format within your Thawte Certificate Center (TCC) ( SO13187) and can be saved by copying and pasting the certificate text into a plain text editor such as Notepad or Vi. Please be sure to include the header and footer as well as the surrounding dashes. Do not use Microsoft Word or other word processing programs that may add characters. Confirm that there are no extra lines or spaces in the file.  Save your certificate with a .p7b extension.

Note: If the PKCS7 format is not used,  the Intermediate CA certificates MUST be installed separately: SO14996

 


Step 1:  Install SSL certificate

  1. Open the Internet Services Manager (IIS): Click Start > All Programs > Administrative Tools > Internet Information Services (IIS) Manger
  2. Under Web Sites, right-click your web site and select  Properties
  3. Click the Directory Security tab
  4. Under Secure Communications, click Server Certificate
  5. The Web Site Certificate Wizard will open, click Next
  6. Choose Process the Pending Request and Install the Certificate, then click Next
    Important: The pending request must match the response file. If you deleted the pending request in error you must generate a new CSR and replace this certificate.
  7. Select the location of the certificate response file, and then click Next
  8. Select the SSL Port. The default port is 443
  9. Read the summary screen to be sure that you are processing the correct certificate and then click Next
  10. At the confirmation screen, verify the information and click Next
     

Step 2: Verify certificate installation

  1. Stop and start your Web server prior to any testing
    Note: In some cases the changes may not take place after restarting IIS Services and a re-boot is needed.
  2. To verify if your certificate is installed correctly, use the Thawte Installation Checker

Additional Notes:
If you do not specify an IP address when installing your SSL Certificate, the same certificate will be used for all virtual servers created on the system.
If you are hosting multiple sites on a single server, you can specify that the certificate only be used for a particular server IP address.