Ask a Question

Solution ID : SO22088

Last Modified : 05/18/2018

Managed PKI for SSL - Installation Instructions for Microsoft Exchange 2007

Solution

This document provides instructions for installing SSL Certificates for Exchange 2007. If you are unable to use these instructions for your server, Symantec recommends that you contact Microsoft.

This solution contains two Methods to install your SSL Certificate:

Method 1: Installing the certificate received via e-mail.

Method 2: Installing the certificate downloaded from Managed PKI for SSL subscriber service page.
 
 
Method 1: Download and Install SSL certificate sent via e-mail

Step 1: Obtain the SSL certificate sent via email:

  1. Once your Managed PKI for SSL administrator has approved your Certificate request, you will receive an email
    with the certificate download link, also attached (cert.cer), as well as in the body of the email itself.
  2. If using the certificate text provided, copy the SSL certificate and make sure to copy the -----BEGIN CERTIFICATE----- and -----END CERTIFICATE-----
    header and footer. Ensure there are no white spaces, extra line breaks or additional characters.
  3. Use a plain text editor such as Notepad, paste the content of the certificate and save it with extension .txt 

    NOTE: If you selected Microsoft as the server platform during enrollment, continue with the installation from here

     
  4. If you are not sure which server software was selected during the enrolment, proceed with Step 2 bellow.
  
Step 2: Download and Install the Intermediate CAs:
 
 
Step 3: Install the SSL certificate:
 
To proceed with the installation steps for your SSL certificate click here


Method 2: Download and Install SSL certificate in PKCS#7 format

Step 1: Download the SSL certificate from Managed PKI for SSL subscriber services page:
 
Make sure you download the certificate in PKCS#7 format and save it with the extension .txt or .p7b

To install a SSL certificate onto Microsoft Exchange 2007, you will need to use the Exchange Management Shell. 

  1. Copy the SSL certificate file, for example newcert.p7b and save it to C:\ on your Exchange server.
  2. Open the Exchange Management Shell.  Click Start > Programs > Microsoft Exchange Server 2007 > Exchange Management Shell.
  3. Run the Import-ExchangeCertificate and Enable-ExchangeCertificate commands together (both commands are run on the same line, separated by a pipe character).

    Import-ExchangeCertificate -Path C:\newcert.p7b | Enable-ExchangeCertificate -Services "SMTP, IMAP, POP, IIS"

    NOTE: The Services option can be any combination of these values: IMAP, POP, UM, IIS, SMTP. To disable a certificate, set the Services parameter to 'None'.

    For more information regarding the Exchange commands, please refer to this Microsoft Knowledge base article.
     
  4. Verify that your certificate is enabled by running the Get-ExchangeCertificate command.

    C:\> Get-ExchangeCertificate -DomainName your.domain.name


     
  5. In the Services column, letters SIP and W stand for SMTP, IMAP, POP3 and Web (IIS).
    NOTE: If your certificate isn't properly enabled, you can re-run the Enable-ExchangeCertificate command by pasting the thumbprint
    of your certificate as the -ThumbPrint argument such as:
    Enable-ExchangeCertificate -ThumbPrint [paste] -Services "SMTP, IMAP, POP, IIS"

     
  6. Test the ertificate by connecting to your server with Internet Explorer, ActiveSync, or Outlook.
  7. Verify your installation with the Symantec Installation Checker
    NOTE: If using ISA 2004 or ISA 2006, you need to reboot your servers. It has been reported that ISA services won't send
    the intermediate certificate until after a reboot.

Microsoft

          For more information regarding the Exchange Management Shell, please refer to following Microsoft Article